SBDP48A
4 IN / 8 OUT Digital Speaker Management System
The SBDP48A was designed to provide state-of-the-art signal processing while maintaining a simple and direct control interface. From the powerful DSP modules to the multiple control surfaces, these processors provide all the processing and control necessary for both fixed installation and live performance use. Additionally, the programmable software enables any user to quickly set up and use the processors to their full potential by streamlining the setup process and providing a menu-based setup procedure that includes system setup, configuration, and much more. These processors are based on the principle and philosophy of providing everything a user needs between the power amplifiers and the mixer.
Features
• USB Connection for PC or RJ45 LAN Connector for Long Distance Control
• Communication Port Assignment
• Programmable PC Software Software
• Low-Shelving Equalizer, Hi-Shelving Equalizer
• Lo-Cut filter, Hi-Cut filter, All-Pass filter
• Compressor / Limiter 6 Digital Compressors / Limiters per Output
Product Specifications
Audio
ANALOG INPUT:
4 x XLR ELECTRONICALLY BALANCED
ANALOG OUTPUT:
8 X XLR ELECTRONICALLY BALANCED
IMPEDANCE:
>10K OHMS
MINIMUM LOAD:
600 OHM
OUTPUT IMPEDANCE:
<60 OHMS
DISTORTION:
0.02% AT 1kHZ, +18dBm
DYNAMIC RANGE:
>110dB 20Hz-20kHz
FREQUENCY RESPONSE:
20HZ-20kHZ;
0.5dBU @ 20HZ AND 20kHZ
DSP Processing
DSP PRESETS:
30 USER PRESETS
DSP ENGINE:
32 BIT (DATA) x 96 BIT (COEFF.)
DSP RESOLUTION:
32-BIT FOR FILTERING PROCESS
96-BIT RESOLUTION
PARAMETRIC EQUALIZATION:
6 BANDS PER OUTPUT, 8 BANDS PER INPUT
FILTER TYPE:
Q VALUE / BAND WIDTH 0.4 to 28.8 / 3 TO 0.05
FILTER GAIN:
+15dB TO -30dB; STEP DISTANCE 0.1dB
CENTER FREQUENCY:
SELECTABLE WITH A 1/36TH OF OCTAVE RESOLUTION STEPS FROM 20HZ UP TO 20kHZ
CROSSOVER SECTION HPF/LPF:
ONE FILTER PER OUTPUT
SELECTABLE: LINK-RILET, BESSEL, BUTTERWORTH
10Hz-16kHz ADJUSTABLE 1/36 OCT STEP DISTANCE TRANSITIONAL FREQUENCY (HIGH PASS)
60Hz-22kHz ADJUSTABLE 1/36 OCT STEP DISTANCE TRANSITIONAL FREQUENCY (LOW PASS)
±15dB GAIN, ADJUSTABLE STEP DISTANCE 0.1dB
INTERNAL NOISE GENERATOR:
WHITE/PINK NOISE, LEVEL FROM -30dBu TO 0dBu
LIMITER:
THRESHOLD FROM +20 dBu TO -10dBu
START-UP TIME 0.3MS TO 90MS
RELEASE TIME: START-UP TIME 4, 8, 16, or 32 TIMES
MAXIMUM DELAY:
650MS (ADJUSTABLE STEP DISTANCE 2.6uS)
Controllers & Connectors
FRONT PANEL:
LCD DISPLAY WITH BLUE LED BACKLIGHT
3-LED METER PER INPUT CHANNEL -6dBu, 0dBu, +6dBu
3-LED METER PER OUTPUT CHANNEL -6dBu, 0dBu,
CLIP
YELLOW LED (EDIT) PER CHANNEL
RED LED (MUTE) PER CHANNEL
GREEN (SIGNAL) PER CHANNEL
YELLOW (LIMIT/PEAK) PER OUTPUT CHANNEL
MENU, ENTER, BACK, NEXT, ESC, BYPASS UTILITY PUSHBUTTON SWITCH
1,2,3 PARA PUSHBUTTON SWITCH
1,2,3 DEFAULT PROGRAM SHORTCUTS
EDIT/MUTE PUSHBUTTON PER CHANNEL
USB TYPE B CONNECTOR
REAR PANEL:
4 X XLR FEMALE CONNECTOR (INPUT)
8 X XLR MALE CONNECTOR (OUTPUT)
RJ45 LAN CONNECTOR
IEC C13 16A CONNECTOR
POWER ON/OFF SWITCH
Input / Output Section
INPUT SIGNAL:
NEUTRIK® SPEAKON NL4
OUTPUT CONNECTORS:
NEUTRIK® SPEAKON NL4
Power Section
MAIN AC:
90-240VAC (50/60HZ) - 40W
Standard Compliance
CE MARKING:
YES
ROHS:
YES
Dimensions
WIDTH:
19 INCH / 483 mm
DEPTH:
9 INCH / 229 mm
HEIGHT:
1.75 INCH / 44 mm